Sirui VHD-2004 Photo/Video Tripod with VH-10 Fluid Ball Head
Rated 3.5/5 based on 11 customer reviews

Sirui VHD-2004 Photo/Video Tripod with VH-10 Fluid Ball Head

Available: Out of Stock
Wishlist Compare
Rs. 30,475.00
Successful pre-order.Thanks for contacting us!
This aluminum VHD-2004 Photo/Video Tripod with VH-10 Fluid Ball Head from Sirui consists of four-section padded legs, a rotating ball head, and a fluid head that together weigh 5.5 lb.

The legs tighten with twist locks that adjust with a simple turn to extend the legs to a maximum height of 68.9". A second, short center column is included which allows you to drop the tripod to a minimum height of 9.1" without having to lift the column up. One of the tripod legs disconnects and can be used as a monopod, if desired. A bubble level on the top of the legs helps with balance. The rubber feet are removable and can be swapped out for optional spikes, and the tripod also features a 1/4"-20 accessory mount.

The ball head is installed on top of the tripod and supports compact DSLR or midsize cameras weighing up to 33.1 lb. A separate pan lock disengages and allows the head to rotate 360°. The ball also moves freely after unlocking the head's lever lock, and at the same time the cut notch on the side of the head permits you to position a camera at a set angle. The VH-10 fluid head connects to the ball head and features two bubble levels and a telescoping pan handle. A quick release plate with 1/4"-20 and 3/8"-16 threaded mounting screws is included with the head.

VHD-2004 tripod with padded four-section legs, ball head, and VH-10 fluid head
Load capacity of 33.1 lb, 5.5 lb weight, maximum height of 68.9", and minimum height of 9.1"
Twist leg locks and removable leg for use as a monopod
Quick release plate with 1/4"-20 and 3/8"-16 mounting screws
One bubble level on the legs and two on the fluid head help with balance

Sirui SUVHD2004VH10 Specs

Camera Plate
Camera Plate Features Sliding Balance Plate, Quick Release
Camera Mounting Screw 1 x 1/4"-20 Male
Head
Base Mount 1/4"-20 Thread
Bubble Level 2
Accessory Mounting 1 x 1/4"-20 Female Thread
Panning Range None
Legs
Leg Lock Type Twist Lock
Leg Positions Locking 3 Positions and Continuously Adjustable
Independent Leg Spread Yes
Leg Sections 4
Bubble Level Yes
Feet Features Rubber
Spreader None
Detachable Monopod
Leg Sections 4
Monopod Foot Features Removable, Retractable, Rubber
General
Load Capacity 33.07 lb / 15 kg
Maximum Working Height 68.9" / 175.01 cm
Minimum Working Height 9.1" / 23.11 cm
Materials Aluminum
Weight 5.5 lb / 2.49 kg
Packaging Info
Package Weight 10.12 lb
Box Dimensions (LxWxH) 29.6 x 6.4 x 5.8"
in the box 
Sirui VHD-2004 Photo/Video Tripod with VH-10 Fluid Ball Head
This aluminum VHD-2004 Photo/Video Tripod with VH-10 Fluid Ball Head from Sirui consists of four-section padded legs, a rotating ball head, and a fluid head that together weigh 5.5 lb.

The legs tighten with twist locks that adjust with a simple turn to extend the legs to a maximum height of 68.9". A second, short center column is included which allows you to drop the tripod to a minimum height of 9.1" without having to lift the column up. One of the tripod legs disconnects and can be used as a monopod, if desired. A bubble level on the top of the legs helps with balance. The rubber feet are removable and can be swapped out for optional spikes, and the tripod also features a 1/4"-20 accessory mount.

The ball head is installed on top of the tripod and supports compact DSLR or midsize cameras weighing up to 33.1 lb. A separate pan lock disengages and allows the head to rotate 360°. The ball also moves freely after unlocking the head's lever lock, and at the same time the cut notch on the side of the head permits you to position a camera at a set angle. The VH-10 fluid head connects to the ball head and features two bubble levels and a telescoping pan handle. A quick release plate with 1/4"-20 and 3/8"-16 threaded mounting screws is included with the head.

VHD-2004 tripod with padded four-section legs, ball head, and VH-10 fluid head
Load capacity of 33.1 lb, 5.5 lb weight, maximum height of 68.9", and minimum height of 9.1"
Twist leg locks and removable leg for use as a monopod
Quick release plate with 1/4"-20 and 3/8"-16 mounting screws
One bubble level on the legs and two on the fluid head help with balance

Sirui SUVHD2004VH10 Specs

Camera Plate
Camera Plate Features Sliding Balance Plate, Quick Release
Camera Mounting Screw 1 x 1/4"-20 Male
Head
Base Mount 1/4"-20 Thread
Bubble Level 2
Accessory Mounting 1 x 1/4"-20 Female Thread
Panning Range None
Legs
Leg Lock Type Twist Lock
Leg Positions Locking 3 Positions and Continuously Adjustable
Independent Leg Spread Yes
Leg Sections 4
Bubble Level Yes
Feet Features Rubber
Spreader None
Detachable Monopod
Leg Sections 4
Monopod Foot Features Removable, Retractable, Rubber
General
Load Capacity 33.07 lb / 15 kg
Maximum Working Height 68.9" / 175.01 cm
Minimum Working Height 9.1" / 23.11 cm
Materials Aluminum
Weight 5.5 lb / 2.49 kg
Packaging Info
Package Weight 10.12 lb
Box Dimensions (LxWxH) 29.6 x 6.4 x 5.8"
in the box 
Sirui VHD-2004 Photo/Video Tripod with VH-10 Fluid Ball Head