Sirui A1005 Aluminum Tripod with Y-10 Ball Head
Rated 3.5/5 based on 11 customer reviews

Sirui A1005 Aluminum Tripod with Y-10 Ball Head

Available: Out of Stock
Wishlist Compare
Rs. 14,306.00
Successful pre-order.Thanks for contacting us!
The A1005 Aluminum Tripod with Y-10 Ball Head from Sirui is a 5-section tripod that weighs 2.7 lb. The aluminum legs fold a full 180° in reverse to make it a co   mpact 14". With the center column fully extended, the tripod can reach a maximum working height of 55.1". Additionally, with a load capacity of 22 lb, this tripod is suitable for a pro DSLR with a large telephoto lens.


The hook at the bottom of the center column enables you to hang a small sandbag or camera bag to stabilize the tripod. Plus, variable leg-angles allow the tripod to have a minimum height of 10.2", and the center column is also reversible to let you get even closer to the ground. Sometimes a tripod is not allowed in certain areas because space is limited. That is when a useful feature comes into play–the tripod's leg detaches and converts into a monopod. You can increase the height of this monopod by attaching the center column to it.

The included Y-10 Ball Head is Arca-type compatible and comes equipped with a quick release plate. It also has a knob-style lock for the clamp, and two separate knobs control the movement of the ball and 360° panning base. In addition, with the ball head's single-cut notch, the camera can be placed in a 90° angle.

The 2.7 lb tripod has a maximum height of 55.1", a minimum height of 10.2", and a load capacity of 22 lb
The aluminum legs have 5-sections and the legs fold in reverse to a compact 14"
Weight and stability can be increased on the support by adding a small sand bag or camera bag to the hook located at the bottom of the center column
The tripod's detachable leg converts into a monopod and the height is increase when the leg is attached to the center column
The Y-10 Ball Head has separate knobs for the pan and tilt, and a single cut notch for a 90° angle position of the camera                                                       

Sirui A1205 Specs

Head
Head Type Ball Head
Quick Release Plate Type Arca-Type
General
Load Capacity 22 lb / 10 kg
Maximum Working Height 55.1" / 140 cm
Max Height without Center Column 42.7" / 108.5 cm
Minimum Working Height 10.2" / 25.9 cm
Folded Length 14.6" / 37.1 cm
Materials Carbon Fiber
Weight 2.2 lb / 1.0 kg
Legs
Leg Lock Type Twist Lock
Independent Leg Spread Yes
Leg Sections 5
Bubble Level No
Center Column
Center Column Sections 1
Center Column Extension Type Rapid
Lateral / 90-Degree Center Column No
Packaging Info
Package Weight 4.05 lb
Box Dimensions (LxWxH) 16.1 x 4.8 x 4.4"
IN THE BOX                                                                                                                 
Sirui A1005 Aluminum Tripod with Y-10 Ball Head
Drawstring Case
Tools
Spring Hook
Wrist Strap
Reversible 1/4"-20 / 3/8"-16 Mounting Stud
Quick Release Plate
The A1005 Aluminum Tripod with Y-10 Ball Head from Sirui is a 5-section tripod that weighs 2.7 lb. The aluminum legs fold a full 180° in reverse to make it a co   mpact 14". With the center column fully extended, the tripod can reach a maximum working height of 55.1". Additionally, with a load capacity of 22 lb, this tripod is suitable for a pro DSLR with a large telephoto lens.


The hook at the bottom of the center column enables you to hang a small sandbag or camera bag to stabilize the tripod. Plus, variable leg-angles allow the tripod to have a minimum height of 10.2", and the center column is also reversible to let you get even closer to the ground. Sometimes a tripod is not allowed in certain areas because space is limited. That is when a useful feature comes into play–the tripod's leg detaches and converts into a monopod. You can increase the height of this monopod by attaching the center column to it.

The included Y-10 Ball Head is Arca-type compatible and comes equipped with a quick release plate. It also has a knob-style lock for the clamp, and two separate knobs control the movement of the ball and 360° panning base. In addition, with the ball head's single-cut notch, the camera can be placed in a 90° angle.

The 2.7 lb tripod has a maximum height of 55.1", a minimum height of 10.2", and a load capacity of 22 lb
The aluminum legs have 5-sections and the legs fold in reverse to a compact 14"
Weight and stability can be increased on the support by adding a small sand bag or camera bag to the hook located at the bottom of the center column
The tripod's detachable leg converts into a monopod and the height is increase when the leg is attached to the center column
The Y-10 Ball Head has separate knobs for the pan and tilt, and a single cut notch for a 90° angle position of the camera                                                       

Sirui A1205 Specs

Head
Head Type Ball Head
Quick Release Plate Type Arca-Type
General
Load Capacity 22 lb / 10 kg
Maximum Working Height 55.1" / 140 cm
Max Height without Center Column 42.7" / 108.5 cm
Minimum Working Height 10.2" / 25.9 cm
Folded Length 14.6" / 37.1 cm
Materials Carbon Fiber
Weight 2.2 lb / 1.0 kg
Legs
Leg Lock Type Twist Lock
Independent Leg Spread Yes
Leg Sections 5
Bubble Level No
Center Column
Center Column Sections 1
Center Column Extension Type Rapid
Lateral / 90-Degree Center Column No
Packaging Info
Package Weight 4.05 lb
Box Dimensions (LxWxH) 16.1 x 4.8 x 4.4"
IN THE BOX                                                                                                                 
Sirui A1005 Aluminum Tripod with Y-10 Ball Head
Drawstring Case
Tools
Spring Hook
Wrist Strap
Reversible 1/4"-20 / 3/8"-16 Mounting Stud
Quick Release Plate