RODE VIDEOMIC GO ONCAMERA MICROPHONE AND SC7 ADAPTOR BUNDLE
The Rode bundle contains VideoMic GO and SC7 adaptor cable to connect VideoMic GO to smart phone. VideoMic GO Compact and light weight by design, the VideoMic GO delivers clear, crisp, directional audio with incredible ease of use. Its tight pickup area focuses directly in front of the microphone and reduces other surrounding sounds, ensuring that your subject is isolated from distracting background noise. The integrated Rycote® Lyre® shock mount isolates your microphone from bumps and vibrations that could otherwise interfere with your sound. Constructed from a single piece of hardwearing thermoplastic, the Lyre® provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap. The VideoMic GO has no complicated switches or settings and is powered by your camera's external microphone input, requiring no batteries to operate, ensuring you never miss a great shot.. Specifications : Acoustic Principle : Line Gradient Active Electronics : JFET impedance converter with bipolar output buffer Capsule : 0.50" Polar Pattern : Supercardioid Address Type : End Frequency Range : 100Hz 16kHz Maximum SPL : 120dB SPL (@ 1kHz, 1% THD into 1K ohm load) Sensitivity : 35.0dB re 1 Volt/Pascal (17.80mV @ 94 dB SPL) +/ 2 dB @ 1kHz Equivalent Noise Level (Aweighted) : 34dBA Power Options : (Plugin power required (330uA @ 2.5V)) Weight : 73.00gm Dimensions : 79.00mmH x 73.00mmW x 167.00mmD Output : Minijack Output SC7 Adaptor Cable The SC7 is a highquality shielded patch cable, designed to allow the VideoMic GO to connect to TRRS compatible devices such as the iPhone or iPad. The goldplated contacts are colour coded, with grey indicating the TRRS output. The cable is colour matched to the red TRS to TRS cable that is supplied with the VideoMic GO, and is easily fitted by inserting the TRS (black) jack into the rear of the VideoMic GO and the TRRS end (grey) into the smartphone or tablet. Weight : 20.00gm Dimensions : 30.00mmH x 10.00mmW x 170.00mmD |
The Rode bundle contains VideoMic GO and SC7 adaptor cable to connect VideoMic GO to smart phone. VideoMic GO Compact and light weight by design, the VideoMic GO delivers clear, crisp, directional audio with incredible ease of use. Its tight pickup area focuses directly in front of the microphone and reduces other surrounding sounds, ensuring that your subject is isolated from distracting background noise. The integrated Rycote® Lyre® shock mount isolates your microphone from bumps and vibrations that could otherwise interfere with your sound. Constructed from a single piece of hardwearing thermoplastic, the Lyre® provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap. The VideoMic GO has no complicated switches or settings and is powered by your camera's external microphone input, requiring no batteries to operate, ensuring you never miss a great shot.. Specifications : Acoustic Principle : Line Gradient Active Electronics : JFET impedance converter with bipolar output buffer Capsule : 0.50" Polar Pattern : Supercardioid Address Type : End Frequency Range : 100Hz 16kHz Maximum SPL : 120dB SPL (@ 1kHz, 1% THD into 1K ohm load) Sensitivity : 35.0dB re 1 Volt/Pascal (17.80mV @ 94 dB SPL) +/ 2 dB @ 1kHz Equivalent Noise Level (Aweighted) : 34dBA Power Options : (Plugin power required (330uA @ 2.5V)) Weight : 73.00gm Dimensions : 79.00mmH x 73.00mmW x 167.00mmD Output : Minijack Output SC7 Adaptor Cable The SC7 is a highquality shielded patch cable, designed to allow the VideoMic GO to connect to TRRS compatible devices such as the iPhone or iPad. The goldplated contacts are colour coded, with grey indicating the TRRS output. The cable is colour matched to the red TRS to TRS cable that is supplied with the VideoMic GO, and is easily fitted by inserting the TRS (black) jack into the rear of the VideoMic GO and the TRRS end (grey) into the smartphone or tablet. Weight : 20.00gm Dimensions : 30.00mmH x 10.00mmW x 170.00mmD |