RODE VIDEOMIC BUNDLE
Rated 3.5/5 based on 11 customer reviews

RODE VIDEOMIC BUNDLE

Available: Out of Stock
Wishlist Compare
  • Product SKU: PVMS18818
Rs. 111.00
Successful pre-order.Thanks for contacting us!
This video bundle includes :
1 x Rode Video Microphone
1 x Rode PG1 Pistol Grip
1 x Rode DeadCat Windshield
 THE RODE VIDEO MICROPHONE
The Directional Condenser Video Microphone is a professional grade shotgun microphone. Based on the latest "Film industry" technology, the Rode Video Mic. is designed specifically for use with high quality Digital Video Cameras.

The microphone exhibits low noise and an unusually wide bandwidth for its size. It is ultra lightweight, yet rugged due to it’s ABS construction. The Video Mic. is powered by a standard 9 V battery and offers a Low Battery LED status indicator and a switchable high pass filter to reduce unwanted low frequency rumble.

The Video Mic. attaches to any Camcorder that has the standard hotshoe fitting and utilizes a stereo mini jack for audio output.

The Video Mic. is designed to operate from a 9 V battery (NOT supplied). The battery is conveniently located within the support arm of the microphone. A fully removable access cover and a 1way insertion mechanism ensure ease of loading. The battery will provide more than 100 hrs. of continuous use due to alow consumption of only 5.0 mA. The microphone will operate satisfactorily into a load impedance as low as 1 k ohm. If a load below this is used, the output signal level will be reduced.

Features :

Studio recording quality
Rugged fibrereinforced ABS construction
9 V battery operation (NOT supplied)
Custom designed integral "wind" screen
Condenser Microphone
Low noise circuitry
Low handling noise
Integral hot shoe mount & zip pouch
Designed & manufactured in Australia
Full 2 year guarantee
Specifications :

Acoustic Principle: Line plus Gradient
Directional Pattern: SuperCardioid
Frequency range: 40 Hz ~ 20 000 Hz selectable HPF @ 80 Hz/12 dB/octave
Output Impedance: 200 ohm
Signal/Noise ratio DIN/IEC 651: 74 dB (1 kHz rel 1 Pa; per IEC651, IEC26815)
Equivalent Noise: 20 dB SPL (per IEC651, IEC26815)
Maximum SPL: 134 dB (@ 1% THD into 1 k ohm)
Sensitivity at 1 kHz into 1 k ohm: 3 dB re 1 Volt/Pascal (15 mV @ 94 dB SPL) +/ 2 dB (at 1 kHz in free field into open circuit)
Dynamic Range  DIN/IEC 651: 114 dB (per IEC651, IEC26815)
Power (Supply voltage): 9 V DC Alkaline Battery (ANSI:1604A or IEC:6LR61)
Current consumption: 5 mA
Battery Life: >100 hours
Output Connection: Stereo mini jack plug  Ø3.5 mm.
Weight  no battery: 176 grm. (6.21 oz.)
Dimensions: 250 mm
 THE RODE PG1 PISTOL GRIP
The PG1 Cold Shoe Pistol Grip is a convenient and ergonomic way to operate your RØDE VideoMic or Stereo VideoMic independently of your video camera. A convenient 3/8” thread on the base allows connection to a boompole or microphone stand, while the spine features handy cable management.

 THE RODE DEAD CAT WIND SHIELD
Shotgun microphone windshield, 160mm long, suit diameter 46mm.
This video bundle includes :
1 x Rode Video Microphone
1 x Rode PG1 Pistol Grip
1 x Rode DeadCat Windshield
 THE RODE VIDEO MICROPHONE
The Directional Condenser Video Microphone is a professional grade shotgun microphone. Based on the latest "Film industry" technology, the Rode Video Mic. is designed specifically for use with high quality Digital Video Cameras.

The microphone exhibits low noise and an unusually wide bandwidth for its size. It is ultra lightweight, yet rugged due to it’s ABS construction. The Video Mic. is powered by a standard 9 V battery and offers a Low Battery LED status indicator and a switchable high pass filter to reduce unwanted low frequency rumble.

The Video Mic. attaches to any Camcorder that has the standard hotshoe fitting and utilizes a stereo mini jack for audio output.

The Video Mic. is designed to operate from a 9 V battery (NOT supplied). The battery is conveniently located within the support arm of the microphone. A fully removable access cover and a 1way insertion mechanism ensure ease of loading. The battery will provide more than 100 hrs. of continuous use due to alow consumption of only 5.0 mA. The microphone will operate satisfactorily into a load impedance as low as 1 k ohm. If a load below this is used, the output signal level will be reduced.

Features :

Studio recording quality
Rugged fibrereinforced ABS construction
9 V battery operation (NOT supplied)
Custom designed integral "wind" screen
Condenser Microphone
Low noise circuitry
Low handling noise
Integral hot shoe mount & zip pouch
Designed & manufactured in Australia
Full 2 year guarantee
Specifications :

Acoustic Principle: Line plus Gradient
Directional Pattern: SuperCardioid
Frequency range: 40 Hz ~ 20 000 Hz selectable HPF @ 80 Hz/12 dB/octave
Output Impedance: 200 ohm
Signal/Noise ratio DIN/IEC 651: 74 dB (1 kHz rel 1 Pa; per IEC651, IEC26815)
Equivalent Noise: 20 dB SPL (per IEC651, IEC26815)
Maximum SPL: 134 dB (@ 1% THD into 1 k ohm)
Sensitivity at 1 kHz into 1 k ohm: 3 dB re 1 Volt/Pascal (15 mV @ 94 dB SPL) +/ 2 dB (at 1 kHz in free field into open circuit)
Dynamic Range  DIN/IEC 651: 114 dB (per IEC651, IEC26815)
Power (Supply voltage): 9 V DC Alkaline Battery (ANSI:1604A or IEC:6LR61)
Current consumption: 5 mA
Battery Life: >100 hours
Output Connection: Stereo mini jack plug  Ø3.5 mm.
Weight  no battery: 176 grm. (6.21 oz.)
Dimensions: 250 mm
 THE RODE PG1 PISTOL GRIP
The PG1 Cold Shoe Pistol Grip is a convenient and ergonomic way to operate your RØDE VideoMic or Stereo VideoMic independently of your video camera. A convenient 3/8” thread on the base allows connection to a boompole or microphone stand, while the spine features handy cable management.

 THE RODE DEAD CAT WIND SHIELD
Shotgun microphone windshield, 160mm long, suit diameter 46mm.