Instant
Manfrotto Aluminum Camera Slider with Ball Head (24")
- Product SKU: PVMS20811
- Category:CAMERA TRIPODS & SUPPORT,PHOTO ACCESSORIES
| The 24" Aluminum Camera Slider with Ball Head combination from Manfrotto enables you to create smooth tracking shots. Use the head with a camera rig up to 8.8 pounds; the total slider capacity is 22 pounds. Lock the ball head at your chosen angle, or smoothly pan the head as you slide (the single lock does not enable panning while the tilt is fixed). A quick release plate provides quick on/off mounting of your camera. This friction slider features steel ball bearings, an 18" travel distance, and quiet polymer wheels for smooth camera carriage slides. Camera Slider 60cm (23.6") The 23.6" Camera Slider from Manfrotto is a sturdy, portable solution for adding short-length tracking shots and subtle motion to your videos with loads up to 22 lb. It features high-precision steel ball bearings and quiet PSU polymer wheels for smooth camera carriage slides and an adjustable friction system to dial in the right amount of resistance for each slide. The carriage has a maximum travel distance of 18.4". The slider is constructed from machined anodized aluminum and weighs 4.83 lb. It can be setup on any flat and level surface or mounted on a tripod via the 1/4"-20 and 3/8"-16 threads at the center and ends of the tripod. The threads also allow you to attach a variety of optional accessories, such as articulating arms and Manfrotto's Digital Director. Key Features 18.4" travel distance Machined anodized aluminum construction Steel ball bearings and PSU polymer wheels for smooth and quiet operation Adjustable friction system 1/4"-20 and 3/8"-16 attachment points Leveling bubble Made in Italy 494RC2 Mini Ball Head with 200PL-14 Quick Release Plate This 494RC2 Mini Ball Head from Manfrotto features an integrated RC2 quick release cam lock and a 200PL-14 Quick Release Plate. Compatible quick release plate can removed from the head by pulling the cam lock's spring-loaded lever, which also allows the plate to be instantly reattached. The cam lock also features a safety catch to prevent a compatible quick release plate from accidentally disconnecting. The 494RC2 Mini Ball Head with 200PL-14 Quick Release Plate has a load capacity of 8.8 lb and can be attached to tripods or other support systems that feature a 3/8"-16 mount. By loosening the 494RC2's locking knob, its ball-and-socket joint can be quickly swiveled, angled, fully tilted, or returned to its upright position. An additional knob opposite the locking knob can be rotated to apply tension control to the ball-and-socket joint's movements. Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the 200PL-14 quick release plate, which measures 1.7 x 2.1 x 0.4" and has a rubberized, non-slip surface. 494RC2 Mini Ball Head 8.8 lb load capacity Compatible with tripods or support systems that feature a 3/8"-16 mount Uses ball-and-socket joint to help maximize pan-and-tilt flexibility Ball-and-socket joint provides 360° of swivel control, is tiltable down to a 90° angle, and can be locked into place Dual, ball-and-socket joint notches enable two-sided tilt control Integrated RC2 quick release cam lock Locking knob allows ball-and-socket joint to be quickly swiveled, angled, fully tilted, or returned to its upright position Dedicated tension control knob for the ball-and-socket joint's movements Durable, aluminum-alloy construction 200PL-14 Quick Release Plate Compatible with Manfrotto RC2 quick release cam lock Measures 1.7 x 2.1 x 0.4" and has a rubberized, non-slip surface 1/4"-20 mount Durable, aluminum-alloy construction |
-
Camera Slider 60cm (23.6")
Performance Load Capacity 22 lb / 10 kg Travel Distance 18.4" / 46.8 cm Mounting Camera Mounting Screw 3/8"-16 Male Tripod Mounting 3 x 1/4"-20 Female Thread
3 x 3/8"-16 Female ThreadCarriage Bearings Material Steel Physical Body Material Aluminum Track Length 23.6" / 60 cm Weight 4.8 lb / 2.2 kg Packaging Info Box Dimensions (LxWxH) 26.0 x 7.0 x 4.5" -
494RC2 Mini Ball Head with 200PL-14 Quick Release Plate
General Head Type Ball Head Base Mount 3/8"-16 Thread Camera Mounting Screw 1/4"-20 Male Quick Release Plate Type 200PL-14 Load Capacity 8.8 lb / 3.99 kg Number of Bubble Level(s) None Friction Control Yes Independent Pan Lock No Material Aluminum Pan & Tilt Range Lateral Tilt -90° to +90° Physical Ball Sphere Diameter 1" / 25.40 mm Dimensions H: 3.3 x W: 1.6" / H: 8.5 x W: 4.0 cm Weight 11.29 oz / 320 g Packaging Info Box Dimensions (LxWxH) 4.4 x 3.6 x 2.7" Bundle Items
Camera Slider 60cm (23.6")
Limited 2-Year Warranty (Extendable to 5 Years with Online Product Registration)
494RC2 Mini Ball Head with 200PL-14 Quick Release Plate
200PL-14 Quick Release Plate
| The 24" Aluminum Camera Slider with Ball Head combination from Manfrotto enables you to create smooth tracking shots. Use the head with a camera rig up to 8.8 pounds; the total slider capacity is 22 pounds. Lock the ball head at your chosen angle, or smoothly pan the head as you slide (the single lock does not enable panning while the tilt is fixed). A quick release plate provides quick on/off mounting of your camera. This friction slider features steel ball bearings, an 18" travel distance, and quiet polymer wheels for smooth camera carriage slides. Camera Slider 60cm (23.6") The 23.6" Camera Slider from Manfrotto is a sturdy, portable solution for adding short-length tracking shots and subtle motion to your videos with loads up to 22 lb. It features high-precision steel ball bearings and quiet PSU polymer wheels for smooth camera carriage slides and an adjustable friction system to dial in the right amount of resistance for each slide. The carriage has a maximum travel distance of 18.4". The slider is constructed from machined anodized aluminum and weighs 4.83 lb. It can be setup on any flat and level surface or mounted on a tripod via the 1/4"-20 and 3/8"-16 threads at the center and ends of the tripod. The threads also allow you to attach a variety of optional accessories, such as articulating arms and Manfrotto's Digital Director. Key Features 18.4" travel distance Machined anodized aluminum construction Steel ball bearings and PSU polymer wheels for smooth and quiet operation Adjustable friction system 1/4"-20 and 3/8"-16 attachment points Leveling bubble Made in Italy 494RC2 Mini Ball Head with 200PL-14 Quick Release Plate This 494RC2 Mini Ball Head from Manfrotto features an integrated RC2 quick release cam lock and a 200PL-14 Quick Release Plate. Compatible quick release plate can removed from the head by pulling the cam lock's spring-loaded lever, which also allows the plate to be instantly reattached. The cam lock also features a safety catch to prevent a compatible quick release plate from accidentally disconnecting. The 494RC2 Mini Ball Head with 200PL-14 Quick Release Plate has a load capacity of 8.8 lb and can be attached to tripods or other support systems that feature a 3/8"-16 mount. By loosening the 494RC2's locking knob, its ball-and-socket joint can be quickly swiveled, angled, fully tilted, or returned to its upright position. An additional knob opposite the locking knob can be rotated to apply tension control to the ball-and-socket joint's movements. Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the 200PL-14 quick release plate, which measures 1.7 x 2.1 x 0.4" and has a rubberized, non-slip surface. 494RC2 Mini Ball Head 8.8 lb load capacity Compatible with tripods or support systems that feature a 3/8"-16 mount Uses ball-and-socket joint to help maximize pan-and-tilt flexibility Ball-and-socket joint provides 360° of swivel control, is tiltable down to a 90° angle, and can be locked into place Dual, ball-and-socket joint notches enable two-sided tilt control Integrated RC2 quick release cam lock Locking knob allows ball-and-socket joint to be quickly swiveled, angled, fully tilted, or returned to its upright position Dedicated tension control knob for the ball-and-socket joint's movements Durable, aluminum-alloy construction 200PL-14 Quick Release Plate Compatible with Manfrotto RC2 quick release cam lock Measures 1.7 x 2.1 x 0.4" and has a rubberized, non-slip surface 1/4"-20 mount Durable, aluminum-alloy construction |
-
Camera Slider 60cm (23.6")
Performance Load Capacity 22 lb / 10 kg Travel Distance 18.4" / 46.8 cm Mounting Camera Mounting Screw 3/8"-16 Male Tripod Mounting 3 x 1/4"-20 Female Thread
3 x 3/8"-16 Female ThreadCarriage Bearings Material Steel Physical Body Material Aluminum Track Length 23.6" / 60 cm Weight 4.8 lb / 2.2 kg Packaging Info Box Dimensions (LxWxH) 26.0 x 7.0 x 4.5" -
494RC2 Mini Ball Head with 200PL-14 Quick Release Plate
General Head Type Ball Head Base Mount 3/8"-16 Thread Camera Mounting Screw 1/4"-20 Male Quick Release Plate Type 200PL-14 Load Capacity 8.8 lb / 3.99 kg Number of Bubble Level(s) None Friction Control Yes Independent Pan Lock No Material Aluminum Pan & Tilt Range Lateral Tilt -90° to +90° Physical Ball Sphere Diameter 1" / 25.40 mm Dimensions H: 3.3 x W: 1.6" / H: 8.5 x W: 4.0 cm Weight 11.29 oz / 320 g Packaging Info Box Dimensions (LxWxH) 4.4 x 3.6 x 2.7" Bundle Items
Camera Slider 60cm (23.6")
Limited 2-Year Warranty (Extendable to 5 Years with Online Product Registration)
494RC2 Mini Ball Head with 200PL-14 Quick Release Plate
200PL-14 Quick Release Plate
We at PHOTO VATIKAÂ are committed to deliver your order accurately, in good condition and always on time.
Please note our shipping policy:
We currently deliver to more than 1000+ cities across India.
We ship Monday through Saturday, except on public holidays.
To ensure that your order reaches you in good condition, in the shortest span of time, we ship through premier courier agencies only.
If you deem the product to be in a bad condition or if the packaging is tampered with or damaged before delivery, please refuse to accept the package.
Call our help desk at +91-88600-17600 Â (Mon-Sat 11 am till 8 pm)or email us at support@photovatika.com, mentioning your Order ID.
We will ensure that a replacement delivery is made to you at the earliest.
Product Refund/Return Policy:
We are committed to ensuring your satisfaction with any product that you have ordered from photovatika.com.
However, if in an unlikely event you are not satisfied with your purchase, photovatika.com follows the below mentioned Refund/Return Policy:
If you want to cancel the order, before the product has been Shipped, you will be refunded entire amount ,no questions asked.
If you want to cancel the order After the Shipment has left our Premises, we will Charge Shipping and Handling charges not exceeding 10% of the order value.
In case you want to cancel/ return the product once the shipment has been received by you, we only accept the same in case of Damage/Defective goods, the conditions for which are mentioned below.
Damaged/Tampered Delivery:
Please do not accept the delivery of any item from the courier/delivery person, if you feel that the outer packaging is Damaged/Tampered. Please contact our helpdesk for replacement, immediately.
Â
Damaged/Defective Product:
In an unlikely event, if the product you received from us is damaged/defective, please call the helpdesk or drop a mail within 10 working days for a refund/replacement. Products damaged while being used, do not qualify for refund/replacement. Products returned, should not exhibit physical damage to the box or to the product; must have all original packaging and accessories, including the retail box, manuals, cables, and all other items originally included with the product at the time of delivery and above all no tampering with the serial number of product.
 In case we are unable to replace the damaged/defective product, we will refund your money in Full.
Returning the product:
For initiating the return of a product, you may contact us via helpdesk and request a return/replacement. The return/replacement is subject to receipt of the product(s) at our location in unused condition and in its original packaging, failing which return/replacement may not be possible. At the time of collecting the product(s), you will be given a courier consignment number, which is to be retained for future reference.
Risk and Title:
We retain ownership of goods until payment is received in full. Risk in goods, such as loss or damage, passes to you upon delivery.
Money Refund:
If the payment was by Credit Card / NetBanking / Debit Card, we will refund your Credit Card / NetBanking / Debit Card account respectively.
If the payment was by Cash On Delivery / Cash Before Delivery, we will refund your money via a cheque written in your name. You will have to provide the following details:
Your name (as on your bank account):
Order ID:
The refund process will be initiated once we have received the product(s). Typically refunds are processed in less than 10-15 working days but in case of payments by Cash On Delivery and Cash Before Delivery, it may take a few extra days for the cheque to be delivered to your billing address and for the funds to be credited to your account, once you deposit the cheque.
Please note that we shall not be responsible for any delays in credit to the cardholder’s Credit Card / NetBanking / Debit Card account as that is managed by the Cardholder’s issuing bank.
If you have any questions to ask, any doubts to clarify, any complaints to make, do contact us via phone or email.
Call our help desk at +91-88600-17600Â (Mon-Sat 11 am till 8 pm)or email us at support@photovatika.com, mentioning your Order ID.
Shipping Charges
For domestic buyers, all orders delivered from Photovatika.com are free of Charge.
We currently deliver in India only
Â
- Team Photo Vatika
