BOYA | SKU:
PVMS20375
BOYA BY-M1000 Large Diaphragm Condenser Microphone
Rs. 6,495.00
Rs. 16,995.00
Unit price
/
Unavailable
BOYA BY-M1000 Large Diaphragm Condenser Microphone is backordered and will ship as soon as it is back in stock.
Offers
Offers
- Get GST invoice and save up to 28% on business purchases.
- EMI option available.
Delivery and Shipping
Delivery and Shipping
USUALLY SHIPS IN 24 HOURS
Pickup
Pickup
Pickup also available at PhotoVatika Head Office.
Usually ready in 4 hours.
The BOYA BY-M1000 is a large-diaphragm condenser designed for recording in studio applications. Use it for miking vocals or instruments around your studio. It offers three polar patterns: cardioid, omnidirectional, and figure-8. All three polar patterns have their uses in the studio environment.
Omnidirectional gives you an even phase and frequency response all around the capsule. Cardioid deadens the back of the capsule, allowing you to mic sources closer to walls; this is the preferred polar pattern of the project or home studio. Figure-8 deadens both sides of the capsule, while the front and back have the same frequency and phase response; this is a wonderful choose for mono-miking two instruments while minimizing room coloration.
The mic itself boasts a smooth and flat frequency response between 20 Hz and 20 kHz. The two-position low-cut filter can help mitigate some rumble and clean up the signal in situations where low-end frequency is not wanted. The -10 dB pad is a boon when miking loud sources, such as drums. Switches for both are found on the mic itself.
The mic is fashioned out of metal, and runs off 24 to 48V phantom power, supplied from your preamp, console, or interface. A 10' mic cable is included, as is a shockmount, a pop filter, and a 3/8 to 5/8" thread adapter to accommodate all manner of mic stands.
Key Features at a Glance
Large gold-sputtered diaphragm
Great for studio and broadcast
Flat, wide-range frequency response
Omnidirectional, Figure-8, and Cardioid pickup pattern
Switchable low-cut filter at 150 Hz
Selectable -10 dB pad
Included shockmount and pop filter
24 or 48V phantom power
Standard XLR connector
10' XLR cable included
Included 3/8" and 5/8" threads
Specifications
Form Factor
Stand/Boom Mount
Sound Field
Mono
Capsule
Condenser
Diaphragm
1.34" / 34 mm (Condenser)
Polar Pattern
Cardioid, Figure-8, Omnidirectional
Pattern Selection
Switched (Adjustable on Mic)
Orientation
Side Address
Circuitry
Solid-State
Pad
-10 dB
High-Pass Filter
150 Hz
On-Board Controls
Polar Pattern, High-Pass Filter, Pad
Frequency Range
20 Hz to 20 kHz
Impedance
200 Ohms
Sensitivity
-33 dB
Signal-to-Noise Ratio
80 dB
Output Connectors (Analog)
1 x XLR 3-Pin Male (on Mic)
Cable Length
10' / 3.05 m
Operating Voltage
24 to 48 V (Phantom Power)
Color
Black
Mounting
Shockmount (Included)
Construction Material
Metal
Dimensions
ø: 4.53 x H: 8.15 x W: 7.28" / ø: 115 x H: 207 x W: 185 mm
Weight
28.64 oz / 812 g
Package Weight
2.485 lb
Box Dimensions (LxWxH)
9.6 x 8.1 x 6.1"
Omnidirectional gives you an even phase and frequency response all around the capsule. Cardioid deadens the back of the capsule, allowing you to mic sources closer to walls; this is the preferred polar pattern of the project or home studio. Figure-8 deadens both sides of the capsule, while the front and back have the same frequency and phase response; this is a wonderful choose for mono-miking two instruments while minimizing room coloration.
The mic itself boasts a smooth and flat frequency response between 20 Hz and 20 kHz. The two-position low-cut filter can help mitigate some rumble and clean up the signal in situations where low-end frequency is not wanted. The -10 dB pad is a boon when miking loud sources, such as drums. Switches for both are found on the mic itself.
The mic is fashioned out of metal, and runs off 24 to 48V phantom power, supplied from your preamp, console, or interface. A 10' mic cable is included, as is a shockmount, a pop filter, and a 3/8 to 5/8" thread adapter to accommodate all manner of mic stands.
Key Features at a Glance
Large gold-sputtered diaphragm
Great for studio and broadcast
Flat, wide-range frequency response
Omnidirectional, Figure-8, and Cardioid pickup pattern
Switchable low-cut filter at 150 Hz
Selectable -10 dB pad
Included shockmount and pop filter
24 or 48V phantom power
Standard XLR connector
10' XLR cable included
Included 3/8" and 5/8" threads
Specifications
Form Factor
Stand/Boom Mount
Sound Field
Mono
Capsule
Condenser
Diaphragm
1.34" / 34 mm (Condenser)
Polar Pattern
Cardioid, Figure-8, Omnidirectional
Pattern Selection
Switched (Adjustable on Mic)
Orientation
Side Address
Circuitry
Solid-State
Pad
-10 dB
High-Pass Filter
150 Hz
On-Board Controls
Polar Pattern, High-Pass Filter, Pad
Frequency Range
20 Hz to 20 kHz
Impedance
200 Ohms
Sensitivity
-33 dB
Signal-to-Noise Ratio
80 dB
Output Connectors (Analog)
1 x XLR 3-Pin Male (on Mic)
Cable Length
10' / 3.05 m
Operating Voltage
24 to 48 V (Phantom Power)
Color
Black
Mounting
Shockmount (Included)
Construction Material
Metal
Dimensions
ø: 4.53 x H: 8.15 x W: 7.28" / ø: 115 x H: 207 x W: 185 mm
Weight
28.64 oz / 812 g
Package Weight
2.485 lb
Box Dimensions (LxWxH)
9.6 x 8.1 x 6.1"
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.