Boya BY-M1 PRO with BY-K4 3.5mm Female TRS to Male USB Type-C Adapter Cable Connector Dongle - Compatible with Type-C Smartphones and Tablets

The BY-M1 Pro is an universal lavalier microphone, with Mic Gain control & Headphones-out for monitoring, which compatible with smartphones, PC, cameras, audio recorders,and other recording devices etc. On its compact body, there are a few special and useful functions that distinguish BY-M1 Pro to other general microphones in the market. With -10dB pad switch, it electively reduces unwanted plosive when the subject sound is very loud and close to the microphone, make sure the recording is always clear. With a 3/8" headphone jack on the bottom, it allows users to monitoring sound in smartphone mode. In order to ensure you have a good experience, please read the manual thoroughly and retain it for future reference. Specifications Transducer: Electret condenser Polar Pattern: Omni-directional Frequency range: 65 Hz - 18 KHz Signal/Noise: 78 dB SPL Sensitivity: -30 dB +/- 3 dB / 0 dB=1V/Pa, 1 kHz Output impedance: 1000 Ohm or less Battery type: LR44 included (compatible with LR44, 357, and SR44) Connector: 3.5mm (1/8”) 4-pole gold plug Pad Switch: 0/-10dB Dimensions: 6.0m Weight: 58g Product Highlights: Clip-on Mic for Smartphones, DSLRs, camcorders, audio recorders, PC etc. condenser, ideal for video use Low handling noise Includes lapel clip, LR44 battery, foam windscreen,1/4” adapter Play back headphone monitoring in smartphone mode -10dB sound attenuation. Boya BY-K4 - 3.5mm TRRS (female) to USB-C (male) audio adapter.









Specifications
Form Factor

Lavalier

Sound Field

Mono

Capsule

1 x Electret Condenser

Polar Pattern

Omnidirectional

Pad

-10 dB

High-Pass Filter

None

Gain Adjustment

None

On-Board Controls

On/Off, Pad

Windscreen

Foam (Included)

Frequency Range

65 Hz to 18 Hz

Impedance

1 Kilohms

Sensitivity

-30 dB

Signal-to-Noise Ratio

78 dB

Equivalent Noise Level

78 dB SPL

Output Connectors (Analog)

1 x 1/8" / 3.5 mm TRRS Male (on Attached Cable)

Headphone Connector

1 x 1/8" / 3.5 mm

Cable Length

19.69' / 6 m

Bus Power

None

Operating Voltage

Not Specified by Manufacturer

Battery Type

1 x 1.5 V Button (Included)

Mounting

Alligator Clip (Included)

Weight

2.05 oz / 58 g