Manfrotto Aluminum Camera Slider with Ball Head (24")
Rated 3.5/5 based on 11 customer reviews

Manfrotto Aluminum Camera Slider with Ball Head (24")

Available: Out of Stock
Wishlist Compare
Rs. 46,786.00
Successful pre-order.Thanks for contacting us!
The 24" Aluminum Camera Slider with Ball Head combination from Manfrotto enables you to create smooth tracking shots. Use the head with a camera rig up to 8.8 pounds; the total slider capacity is 22 pounds. Lock the ball head at your chosen angle, or smoothly pan the head as you slide (the single lock does not enable panning while the tilt is fixed). A quick release plate provides quick on/off mounting of your camera. This friction slider features steel ball bearings, an 18" travel distance, and quiet polymer wheels for smooth camera carriage slides.
Camera Slider 60cm (23.6")
The 23.6" Camera Slider from Manfrotto is a sturdy, portable solution for adding short-length tracking shots and subtle motion to your videos with loads up to 22 lb. It features high-precision steel ball bearings and quiet PSU polymer wheels for smooth camera carriage slides and an adjustable friction system to dial in the right amount of resistance for each slide. The carriage has a maximum travel distance of 18.4". The slider is constructed from machined anodized aluminum and weighs 4.83 lb. It can be setup on any flat and level surface or mounted on a tripod via the 1/4"-20 and 3/8"-16 threads at the center and ends of the tripod. The threads also allow you to attach a variety of optional accessories, such as articulating arms and Manfrotto's Digital Director.


Key Features
18.4" travel distance
Machined anodized aluminum construction
Steel ball bearings and PSU polymer wheels for smooth and quiet operation
Adjustable friction system
1/4"-20 and 3/8"-16 attachment points
Leveling bubble
Made in Italy
494RC2 Mini Ball Head with 200PL-14 Quick Release Plate
This 494RC2 Mini Ball Head from Manfrotto features an integrated RC2 quick release cam lock and a 200PL-14 Quick Release Plate. Compatible quick release plate can removed from the head by pulling the cam lock's spring-loaded lever, which also allows the plate to be instantly reattached. The cam lock also features a safety catch to prevent a compatible quick release plate from accidentally disconnecting.

The 494RC2 Mini Ball Head with 200PL-14 Quick Release Plate has a load capacity of 8.8 lb and can be attached to tripods or other support systems that feature a 3/8"-16 mount. By loosening the 494RC2's locking knob, its ball-and-socket joint can be quickly swiveled, angled, fully tilted, or returned to its upright position. An additional knob opposite the locking knob can be rotated to apply tension control to the ball-and-socket joint's movements.

Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the 200PL-14 quick release plate, which measures 1.7 x 2.1 x 0.4" and has a rubberized, non-slip surface.


494RC2 Mini Ball Head
8.8 lb load capacity
Compatible with tripods or support systems that feature a 3/8"-16 mount
Uses ball-and-socket joint to help maximize pan-and-tilt flexibility
Ball-and-socket joint provides 360° of swivel control, is tiltable down to a 90° angle, and can be locked into place
Dual, ball-and-socket joint notches enable two-sided tilt control
Integrated RC2 quick release cam lock
Locking knob allows ball-and-socket joint to be quickly swiveled, angled, fully tilted, or returned to its upright position
Dedicated tension control knob for the ball-and-socket joint's movements
Durable, aluminum-alloy construction
200PL-14 Quick Release Plate
Compatible with Manfrotto RC2 quick release cam lock
Measures 1.7 x 2.1 x 0.4" and has a rubberized, non-slip surface
1/4"-20 mount
Durable, aluminum-alloy construction
  • Camera Slider 60cm (23.6")
    Performance
    Load Capacity 22 lb / 10 kg
    Travel Distance 18.4" / 46.8 cm
    Mounting
    Camera Mounting Screw 3/8"-16 Male
    Tripod Mounting 3 x 1/4"-20 Female Thread
    3 x 3/8"-16 Female Thread
    Carriage
    Bearings
    Material Steel
    Physical
    Body Material Aluminum
    Track Length 23.6" / 60 cm
    Weight 4.8 lb / 2.2 kg
    Packaging Info
    Box Dimensions (LxWxH) 26.0 x 7.0 x 4.5"
  • 494RC2 Mini Ball Head with 200PL-14 Quick Release Plate
    General
    Head Type Ball Head
    Base Mount 3/8"-16 Thread
    Camera Mounting Screw 1/4"-20 Male
    Quick Release Plate Type 200PL-14
    Load Capacity 8.8 lb / 3.99 kg
    Number of Bubble Level(s) None
    Friction Control Yes
    Independent Pan Lock No
    Material Aluminum
    Pan & Tilt Range
    Lateral Tilt -90° to +90°
    Physical
    Ball Sphere Diameter 1" / 25.40 mm
    Dimensions H: 3.3 x W: 1.6" / H: 8.5 x W: 4.0 cm
    Weight 11.29 oz / 320 g
    Packaging Info
    Box Dimensions (LxWxH) 4.4 x 3.6 x 2.7"
    Bundle Items
    Camera Slider 60cm (23.6")
    Limited 2-Year Warranty (Extendable to 5 Years with Online Product Registration)
    494RC2 Mini Ball Head with 200PL-14 Quick Release Plate
    200PL-14 Quick Release Plate
The 24" Aluminum Camera Slider with Ball Head combination from Manfrotto enables you to create smooth tracking shots. Use the head with a camera rig up to 8.8 pounds; the total slider capacity is 22 pounds. Lock the ball head at your chosen angle, or smoothly pan the head as you slide (the single lock does not enable panning while the tilt is fixed). A quick release plate provides quick on/off mounting of your camera. This friction slider features steel ball bearings, an 18" travel distance, and quiet polymer wheels for smooth camera carriage slides.
Camera Slider 60cm (23.6")
The 23.6" Camera Slider from Manfrotto is a sturdy, portable solution for adding short-length tracking shots and subtle motion to your videos with loads up to 22 lb. It features high-precision steel ball bearings and quiet PSU polymer wheels for smooth camera carriage slides and an adjustable friction system to dial in the right amount of resistance for each slide. The carriage has a maximum travel distance of 18.4". The slider is constructed from machined anodized aluminum and weighs 4.83 lb. It can be setup on any flat and level surface or mounted on a tripod via the 1/4"-20 and 3/8"-16 threads at the center and ends of the tripod. The threads also allow you to attach a variety of optional accessories, such as articulating arms and Manfrotto's Digital Director.


Key Features
18.4" travel distance
Machined anodized aluminum construction
Steel ball bearings and PSU polymer wheels for smooth and quiet operation
Adjustable friction system
1/4"-20 and 3/8"-16 attachment points
Leveling bubble
Made in Italy
494RC2 Mini Ball Head with 200PL-14 Quick Release Plate
This 494RC2 Mini Ball Head from Manfrotto features an integrated RC2 quick release cam lock and a 200PL-14 Quick Release Plate. Compatible quick release plate can removed from the head by pulling the cam lock's spring-loaded lever, which also allows the plate to be instantly reattached. The cam lock also features a safety catch to prevent a compatible quick release plate from accidentally disconnecting.

The 494RC2 Mini Ball Head with 200PL-14 Quick Release Plate has a load capacity of 8.8 lb and can be attached to tripods or other support systems that feature a 3/8"-16 mount. By loosening the 494RC2's locking knob, its ball-and-socket joint can be quickly swiveled, angled, fully tilted, or returned to its upright position. An additional knob opposite the locking knob can be rotated to apply tension control to the ball-and-socket joint's movements.

Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the 200PL-14 quick release plate, which measures 1.7 x 2.1 x 0.4" and has a rubberized, non-slip surface.


494RC2 Mini Ball Head
8.8 lb load capacity
Compatible with tripods or support systems that feature a 3/8"-16 mount
Uses ball-and-socket joint to help maximize pan-and-tilt flexibility
Ball-and-socket joint provides 360° of swivel control, is tiltable down to a 90° angle, and can be locked into place
Dual, ball-and-socket joint notches enable two-sided tilt control
Integrated RC2 quick release cam lock
Locking knob allows ball-and-socket joint to be quickly swiveled, angled, fully tilted, or returned to its upright position
Dedicated tension control knob for the ball-and-socket joint's movements
Durable, aluminum-alloy construction
200PL-14 Quick Release Plate
Compatible with Manfrotto RC2 quick release cam lock
Measures 1.7 x 2.1 x 0.4" and has a rubberized, non-slip surface
1/4"-20 mount
Durable, aluminum-alloy construction
  • Camera Slider 60cm (23.6")
    Performance
    Load Capacity 22 lb / 10 kg
    Travel Distance 18.4" / 46.8 cm
    Mounting
    Camera Mounting Screw 3/8"-16 Male
    Tripod Mounting 3 x 1/4"-20 Female Thread
    3 x 3/8"-16 Female Thread
    Carriage
    Bearings
    Material Steel
    Physical
    Body Material Aluminum
    Track Length 23.6" / 60 cm
    Weight 4.8 lb / 2.2 kg
    Packaging Info
    Box Dimensions (LxWxH) 26.0 x 7.0 x 4.5"
  • 494RC2 Mini Ball Head with 200PL-14 Quick Release Plate
    General
    Head Type Ball Head
    Base Mount 3/8"-16 Thread
    Camera Mounting Screw 1/4"-20 Male
    Quick Release Plate Type 200PL-14
    Load Capacity 8.8 lb / 3.99 kg
    Number of Bubble Level(s) None
    Friction Control Yes
    Independent Pan Lock No
    Material Aluminum
    Pan & Tilt Range
    Lateral Tilt -90° to +90°
    Physical
    Ball Sphere Diameter 1" / 25.40 mm
    Dimensions H: 3.3 x W: 1.6" / H: 8.5 x W: 4.0 cm
    Weight 11.29 oz / 320 g
    Packaging Info
    Box Dimensions (LxWxH) 4.4 x 3.6 x 2.7"
    Bundle Items
    Camera Slider 60cm (23.6")
    Limited 2-Year Warranty (Extendable to 5 Years with Online Product Registration)
    494RC2 Mini Ball Head with 200PL-14 Quick Release Plate
    200PL-14 Quick Release Plate